Help on updating to directx9.0 
Author Message
 Help on updating to directx9.0

While trying to update to directx9.0 I get the
following in DirectxLog:

06/20/03 19:59:12: DXWSetup: ***** DXWSETUP *****
06/20/03 19:59:12: DXWSetup: WinMain()
06/20/03 19:59:12: DXWSetup: GetDXVersion(): Unable to
get RC string from registry.
06/20/03 19:59:12: DXWSetup: DXVersion: 4.08.01.0810.00
06/20/03 19:59:12: DXWSetup: SetupVersion: 4.09.00.0901.06
06/20/03 19:59:18: DXWSetup: Target
file: 'C:\WINDOWS\System32\directx\websetup\dsetup.dll'
        Target file is Version 4.9.0.901
        Source file is Version 4.9.0.901
06/20/03 19:59:18: DXWSetup: Target
file: 'C:\WINDOWS\System32\directx\websetup\dsetup32.dll'
        Target file is Version 4.9.0.901
        Source file is Version 4.9.0.901
06/20/03 19:59:18: DXWSetup: CDXWSetup()
06/20/03 19:59:18: DXWSetup: ERROR: CoCreateInstance on
IID_IInstallEngine failed
06/20/03 19:59:18: DXWSetup: CDXWSetup::InitInstallEngine
()
06/20/03 19:59:18: DXWSetup: Install Engine is invalid.
06/20/03 19:59:23: DXWSetup: InitInstallEngine() failed.
06/20/03 19:59:23: DXWSetup: ~CDXWSetup()

Dxdiag shows problem in display tab: registry error

 Card name: ALL-IN-WONDER RADEON 8500DV
     Manufacturer: ATI Technologies Inc.
        Chip type: Radeon 8500 (BB)
         DAC type: Internal DAC(350MHz)
        Device ID:
Enum\PCI\VEN_1002&DEV_4242&SUBSYS_02AA1002&REV_00
   Display Memory: 64.0 MB
     Current Mode: 1024 x 768 (32 bit) (70Hz)
          Monitor: Default Monitor
  Monitor Max Res:
      Driver Name: ati2dvag.dll
   Driver Version: 6.14.01.6292 (English)
      DDI Version: 8 (or higher)
Driver Attributes: Final Retail
 Driver Date/Size: 1/20/2003 22:45:02, 268416 bytes
    Driver Signed: Yes
  WHQL Date Stamp: n/a
              VDD:
         Mini VDD: ati2mtag.sys
    Mini VDD Date: 1/20/2003 22:44:36, 569984 bytes
Device Identifier: {D7B71EE2-0102-11CF-266B-AB22A1C2CB35}
        Vendor ID: 0x1002
        Device ID: 0x4242
        SubSys ID: 0x02AA1002
      Revision ID: 0x0000
         Registry: Errors found:
Key ', Value 'Base', should be 'rgb', but is 'rgbx'.
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result:
 D3D7 Test Result:
 D3D8 Test Result:

I updated ATI drivers to latest with no effect.

My system info is:
Time of this report: 6/19/2003, 12:06:19
       Machine name: COMPUTER1
   Operating System: Microsoft Windows XP Home Edition
(5.1, Build 2600) Service Pack 1 (2600.xpsp2.030422-1633)
           Language: English (Regional Setting: English)
System Manufacturer: VIA Technologies, Inc.
       System Model: VT8366-8233
               BIOS: SOYO   - 42302e31
          Processor: AMD Athlon(tm) XP 2000+,  MMX,  
3DNow, ~1666MHz
             Memory: 512MB RAM
          Page File: 459MB used, 791MB available
Primary File System: n/a
    DirectX Version: DirectX 8.1 (4.08.01.0810)
DX Setup Parameters: Not found
     DxDiag Version: 5.01.2600.1106 32bit Unicode

I am at a loss on figuring out this problem.
Any suggestions would be appreciated.
Lew



Wed, 07 Dec 2005 09:01:06 GMT  
 Help on updating to directx9.0
Try to update your video card drives
Quote:
>-----Original Message-----
>While trying to update to directx9.0 I get the
>following in DirectxLog:

>06/20/03 19:59:12: DXWSetup: ***** DXWSETUP *****
>06/20/03 19:59:12: DXWSetup: WinMain()
>06/20/03 19:59:12: DXWSetup: GetDXVersion(): Unable to
>get RC string from registry.
>06/20/03 19:59:12: DXWSetup: DXVersion: 4.08.01.0810.00
>06/20/03 19:59:12: DXWSetup: SetupVersion: 4.09.00.0901.06
>06/20/03 19:59:18: DXWSetup: Target
>file: 'C:\WINDOWS\System32\directx\websetup\dsetup.dll'
>    Target file is Version 4.9.0.901
>    Source file is Version 4.9.0.901
>06/20/03 19:59:18: DXWSetup: Target
>file: 'C:\WINDOWS\System32\directx\websetup\dsetup32.dll'
>    Target file is Version 4.9.0.901
>    Source file is Version 4.9.0.901
>06/20/03 19:59:18: DXWSetup: CDXWSetup()
>06/20/03 19:59:18: DXWSetup: ERROR: CoCreateInstance on
>IID_IInstallEngine failed
>06/20/03 19:59:18: DXWSetup: CDXWSetup::InitInstallEngine
>()
>06/20/03 19:59:18: DXWSetup: Install Engine is invalid.
>06/20/03 19:59:23: DXWSetup: InitInstallEngine() failed.
>06/20/03 19:59:23: DXWSetup: ~CDXWSetup()

>Dxdiag shows problem in display tab: registry error

> Card name: ALL-IN-WONDER RADEON 8500DV
>     Manufacturer: ATI Technologies Inc.
>        Chip type: Radeon 8500 (BB)
>         DAC type: Internal DAC(350MHz)
>        Device ID:
>Enum\PCI\VEN_1002&DEV_4242&SUBSYS_02AA1002&REV_00
>   Display Memory: 64.0 MB
>     Current Mode: 1024 x 768 (32 bit) (70Hz)
>          Monitor: Default Monitor
>  Monitor Max Res:
>      Driver Name: ati2dvag.dll
>   Driver Version: 6.14.01.6292 (English)
>      DDI Version: 8 (or higher)
>Driver Attributes: Final Retail
> Driver Date/Size: 1/20/2003 22:45:02, 268416 bytes
>    Driver Signed: Yes
>  WHQL Date Stamp: n/a
>              VDD:
>         Mini VDD: ati2mtag.sys
>    Mini VDD Date: 1/20/2003 22:44:36, 569984 bytes
>Device Identifier: {D7B71EE2-0102-11CF-266B-AB22A1C2CB35}
>        Vendor ID: 0x1002
>        Device ID: 0x4242
>        SubSys ID: 0x02AA1002
>      Revision ID: 0x0000
>         Registry: Errors found:
>Key ', Value 'Base', should be 'rgb', but is 'rgbx'.
>     DDraw Status: Enabled
>       D3D Status: Enabled
>       AGP Status: Enabled
>DDraw Test Result:
> D3D7 Test Result:
> D3D8 Test Result:

>I updated ATI drivers to latest with no effect.

>My system info is:
>Time of this report: 6/19/2003, 12:06:19
>       Machine name: COMPUTER1
>   Operating System: Microsoft Windows XP Home Edition
>(5.1, Build 2600) Service Pack 1 (2600.xpsp2.030422-1633)
>           Language: English (Regional Setting: English)
>System Manufacturer: VIA Technologies, Inc.
>       System Model: VT8366-8233
>               BIOS: SOYO   - 42302e31
>          Processor: AMD Athlon(tm) XP 2000+,  MMX,  
>3DNow, ~1666MHz
>             Memory: 512MB RAM
>          Page File: 459MB used, 791MB available
>Primary File System: n/a
>    DirectX Version: DirectX 8.1 (4.08.01.0810)
>DX Setup Parameters: Not found
>     DxDiag Version: 5.01.2600.1106 32bit Unicode

>I am at a loss on figuring out this problem.
>Any suggestions would be appreciated.
>Lew
>.



Thu, 08 Dec 2005 04:33:56 GMT  
 Help on updating to directx9.0
I updated my video card drivers and it did
not change anything.  tks

Quote:
>-----Original Message-----
>Try to update your video card drives
>>-----Original Message-----
>>While trying to update to directx9.0 I get the
>>following in DirectxLog:

>>06/20/03 19:59:12: DXWSetup: ***** DXWSETUP *****
>>06/20/03 19:59:12: DXWSetup: WinMain()
>>06/20/03 19:59:12: DXWSetup: GetDXVersion(): Unable to
>>get RC string from registry.
>>06/20/03 19:59:12: DXWSetup: DXVersion: 4.08.01.0810.00
>>06/20/03 19:59:12: DXWSetup: SetupVersion:
4.09.00.0901.06
>>06/20/03 19:59:18: DXWSetup: Target
>>file: 'C:\WINDOWS\System32\directx\websetup\dsetup.dll'
>>        Target file is Version 4.9.0.901
>>        Source file is Version 4.9.0.901
>>06/20/03 19:59:18: DXWSetup: Target
>>file: 'C:\WINDOWS\System32

\directx\websetup\dsetup32.dll'
Quote:
>>        Target file is Version 4.9.0.901
>>        Source file is Version 4.9.0.901
>>06/20/03 19:59:18: DXWSetup: CDXWSetup()
>>06/20/03 19:59:18: DXWSetup: ERROR: CoCreateInstance on
>>IID_IInstallEngine failed
>>06/20/03 19:59:18: DXWSetup:

CDXWSetup::InitInstallEngine

- Show quoted text -

Quote:
>>()
>>06/20/03 19:59:18: DXWSetup: Install Engine is invalid.
>>06/20/03 19:59:23: DXWSetup: InitInstallEngine() failed.
>>06/20/03 19:59:23: DXWSetup: ~CDXWSetup()

>>Dxdiag shows problem in display tab: registry error

>> Card name: ALL-IN-WONDER RADEON 8500DV
>>     Manufacturer: ATI Technologies Inc.
>>        Chip type: Radeon 8500 (BB)
>>         DAC type: Internal DAC(350MHz)
>>        Device ID:
>>Enum\PCI\VEN_1002&DEV_4242&SUBSYS_02AA1002&REV_00
>>   Display Memory: 64.0 MB
>>     Current Mode: 1024 x 768 (32 bit) (70Hz)
>>          Monitor: Default Monitor
>>  Monitor Max Res:
>>      Driver Name: ati2dvag.dll
>>   Driver Version: 6.14.01.6292 (English)
>>      DDI Version: 8 (or higher)
>>Driver Attributes: Final Retail
>> Driver Date/Size: 1/20/2003 22:45:02, 268416 bytes
>>    Driver Signed: Yes
>>  WHQL Date Stamp: n/a
>>              VDD:
>>         Mini VDD: ati2mtag.sys
>>    Mini VDD Date: 1/20/2003 22:44:36, 569984 bytes
>>Device Identifier: {D7B71EE2-0102-11CF-266B-
AB22A1C2CB35}
>>        Vendor ID: 0x1002
>>        Device ID: 0x4242
>>        SubSys ID: 0x02AA1002
>>      Revision ID: 0x0000
>>         Registry: Errors found:
>>Key ', Value 'Base', should be 'rgb', but is 'rgbx'.
>>     DDraw Status: Enabled
>>       D3D Status: Enabled
>>       AGP Status: Enabled
>>DDraw Test Result:
>> D3D7 Test Result:
>> D3D8 Test Result:

>>I updated ATI drivers to latest with no effect.

>>My system info is:
>>Time of this report: 6/19/2003, 12:06:19
>>       Machine name: COMPUTER1
>>   Operating System: Microsoft Windows XP Home Edition
>>(5.1, Build 2600) Service Pack 1 (2600.xpsp2.030422-
1633)
>>           Language: English (Regional Setting: English)
>>System Manufacturer: VIA Technologies, Inc.
>>       System Model: VT8366-8233
>>               BIOS: SOYO   - 42302e31
>>          Processor: AMD Athlon(tm) XP 2000+,  MMX,  
>>3DNow, ~1666MHz
>>             Memory: 512MB RAM
>>          Page File: 459MB used, 791MB available
>>Primary File System: n/a
>>    DirectX Version: DirectX 8.1 (4.08.01.0810)
>>DX Setup Parameters: Not found
>>     DxDiag Version: 5.01.2600.1106 32bit Unicode

>>I am at a loss on figuring out this problem.
>>Any suggestions would be appreciated.
>>Lew
>>.

>.



Thu, 08 Dec 2005 08:43:18 GMT  
 
 [ 3 post ] 

 Relevant Pages 

1. Help with Directx9 installation

2. DirectX9 and Nforce2....is it possible to uninstall directx9?

3. DirectX9?

4. how to close a directx9 movie windows

5. directx9 version of windows not current

6. couldn't run certain games after DirectX9.0a d/l

7. directx9.0 sdk installation & visual c++ 6.0

8. Help: updating text file-Updating Data in a linked table not supported by this ISAM

9. Help on Updating Records: PLEASE HELP

10. RE Help on Updating Records: PLEASE HELP

11. Using--After Update-- to update field in table.

12. Updating a single OLE link for a record OR updating existing database

 

 
Powered by phpBB® Forum Software