Board index » VB Crystal Report

All times are UTC



 CR with POS printer 
Author Message
Miodrag Sablji
#1 / 2
 CR with POS printer

I'm trying to print report with "Star SP200" POS printer. Report is made
with CR 8.5. Problem is that I can't set length of roll paper and in such
case report is printed with paper-size of  76 x 254 that causes that printer
device gives full length of roll paper not considering real length with
header and only two or three items on cash bill. Installed printer does not
support any other peper-size setting.



Fri, 18 Nov 2005 20:31:25 GMT  
Rob Diaman
#2 / 2
 CR with POS printer
Try setting the Printer Drivers to Reciept Mode.

Rob


Quote:

> I'm trying to print report with "Star SP200" POS printer. Report is made
> with CR 8.5. Problem is that I can't set length of roll paper and in such
> case report is printed with paper-size of  76 x 254 that causes that
printer
> device gives full length of roll paper not considering real length with
> header and only two or three items on cash bill. Installed printer does
not
> support any other peper-size setting.



Sat, 19 Nov 2005 23:59:56 GMT  
 
 Page 1 of 1
  [ 2 post ] 

 Relevant Pages 

1. print CR report in a pos printer (epson TM L60II)

2. printing and talking with a serial pos printer, changing the port of a printer

3. printing on POS printers

4. programming for samsung pos printer

5. serial POS printer

6. Anyone used POS printer before?

7. DataReport with POS printer

8. Printing to an POS printer

9. CR & POS printer?

10. Choosing a printer during run-time (other than default) - Crystal Report 9 (CR 9)

11. How can i Select multiple printer setup in Runtime in CR 8.5

12. How can i Select multiple printer setup in Runtime in CR 8.5

  

 
Powered by phpBB® Forum Software