VB Controls, SSTab problem

SSTab problem

Author	Message
Lothar Geye #1 / 2	SSTab problem I use a SStab control with three tabs. On each tab there are some text and combo boxes. If the focus is on the last control on the first tab and the user presses the tab key, the tab 2 should become activ and the focus should be on the first control of the second tab. I tried a lot of things like LostFocus, KeyPress a.s.o. but was not successful. Anybody any ideas? Lothar Geyer
Tue, 01 Jun 2004 03:34:08 GMT

Ken Halte #2 / 2	SSTab problem Here's a good start... Automatically Switch Tabs with the SSTab Control http://www.vbcity.com/pubs/article.asp?alias=autotabs -- Ken Halter MS-MVP-VB http://www.vbsight.com Please respond only to the newsgroups so all can benefit. Besides.. I check my email only once a week :-) Quote: > I use a SStab control with three tabs. On each tab there are some text > and combo boxes. If the focus is on the last control on the first tab > and the user presses the tab key, the tab 2 should become activ and the > focus should be on the first control of the second tab. > I tried a lot of things like LostFocus, KeyPress a.s.o. but was not > successful. > Anybody any ideas? > Lothar Geyer
Tue, 01 Jun 2004 04:03:09 GMT

Page 1 of 1

[ 2 post ]