Patches for tcl8.0/doc/* and tk8.0/doc/* 
Author Message
 Patches for tcl8.0/doc/* and tk8.0/doc/*

The following patches fix some problems and adjust some not quite
problems in the final tcl8.0 and tk8.0 man pages.  Most of the
problems are erroneous font changes, and the nonproblems are correct
font changes which just look erroneous.

-- rec --

------------------------------------------------------------------------
diff -c -r tcl8.0/doc/CrtInterp.3 tcl8.0a/doc/CrtInterp.3
*** tcl8.0/doc/CrtInterp.3      Fri Aug  1 11:48:56 1997
--- tcl8.0a/doc/CrtInterp.3     Fri Oct 24 19:48:14 1997
***************
*** 102,108 ****
  has been called. To ensure that the interpreter is properly deleted when
  it is no longer needed, call \fBTcl_InterpDeleted\fR to test if some other
  code already called \fBTcl_DeleteInterp\fR; if not, call
! \fBTcl_DeleteInterp\fR before calling \fBTcl_Release\fB in your own code.
  Do not call \fBTcl_DeleteInterp\fR on an interpreter for which
  \fBTcl_InterpDeleted\fR returns nonzero.
  .TP
--- 102,108 ----
  has been called. To ensure that the interpreter is properly deleted when
  it is no longer needed, call \fBTcl_InterpDeleted\fR to test if some other
  code already called \fBTcl_DeleteInterp\fR; if not, call
! \fBTcl_DeleteInterp\fR before calling \fBTcl_Release\fR in your own code.
  Do not call \fBTcl_DeleteInterp\fR on an interpreter for which
  \fBTcl_InterpDeleted\fR returns nonzero.
  .TP
diff -c -r tcl8.0/doc/interp.n tcl8.0a/doc/interp.n
*** tcl8.0/doc/interp.n Fri Aug  1 11:48:59 1997
--- tcl8.0a/doc/interp.n        Fri Oct 24 19:35:23 1997
***************
*** 84,104 ****
  channels between interpreters.  It can have any of several forms, depending
  on the \fIoption\fR argument:
  .TP
! \fBinterp \fBalias \fIsrcPath \fIsrcCmd\fR
  Returns a Tcl list whose elements are the \fItargetCmd\fR and
  \fIarg\fRs associated with the alias named \fIsrcCmd\fR
  (all of these are the values specified when the alias was
  created; it is possible that the actual source command in the
  slave is different from \fIsrcCmd\fR if it was renamed).
  .TP
! \fBinterp \fBalias \fIsrcPath \fIsrcCmd\fR \fB{}\fR
  Deletes the alias for \fIsrcCmd\fR in the slave interpreter identified by
  \fIsrcPath\fR.
  \fIsrcCmd\fR refers to the name under which the alias
  was created;  if the source command has been renamed, the renamed
  command will be deleted.
  .TP
! \fBinterp \fBalias \fIsrcPath \fIsrcCmd\fR \fItargetPath \fItargetCmd \fR?\fIarg arg ...\fR?
  This command creates an alias between one slave and another (see the
  \fBalias\fR slave command below for creating aliases between a slave
  and its master).  In this command, either of the slave interpreters
--- 84,104 ----
  channels between interpreters.  It can have any of several forms, depending
  on the \fIoption\fR argument:
  .TP
! \fBinterp\fR \fBalias\fR \fIsrcPath\fR \fIsrcCmd\fR
  Returns a Tcl list whose elements are the \fItargetCmd\fR and
  \fIarg\fRs associated with the alias named \fIsrcCmd\fR
  (all of these are the values specified when the alias was
  created; it is possible that the actual source command in the
  slave is different from \fIsrcCmd\fR if it was renamed).
  .TP
! \fBinterp\fR \fBalias\fR \fIsrcPath\fR \fIsrcCmd\fR \fB{}\fR
  Deletes the alias for \fIsrcCmd\fR in the slave interpreter identified by
  \fIsrcPath\fR.
  \fIsrcCmd\fR refers to the name under which the alias
  was created;  if the source command has been renamed, the renamed
  command will be deleted.
  .TP
! \fBinterp\fR \fBalias\fR \fIsrcPath\fR \fIsrcCmd\fR \fItargetPath\fR \fItargetCmd \fR?\fIarg arg ...\fR?
  This command creates an alias between one slave and another (see the
  \fBalias\fR slave command below for creating aliases between a slave
  and its master).  In this command, either of the slave interpreters
***************
*** 122,132 ****
  invoked in the source interpreter.  See ALIAS INVOCATION below for
  more details.
  .TP
! \fBinterp \fBaliases \fR?\fIpath\fR?
  This command returns a Tcl list of the names of all the source commands for
  aliases defined in the interpreter identified by \fIpath\fR.
  .TP
! \fBinterp \fBcreate \fR?\fB\-safe\fR? ?\fB\-\|\-\fR? ?\fIpath\fR?
  Creates a slave interpreter identified by \fIpath\fR and a new command,
  called a \fIslave command\fR. The name of the slave command is the last
  component of \fIpath\fR. The new slave interpreter and the slave command
--- 122,132 ----
  invoked in the source interpreter.  See ALIAS INVOCATION below for
  more details.
  .TP
! \fBinterp\fR \fBaliases \fR?\fIpath\fR?
  This command returns a Tcl list of the names of all the source commands for
  aliases defined in the interpreter identified by \fIpath\fR.
  .TP
! \fBinterp\fR \fBcreate \fR?\fB\-safe\fR? ?\fB\-\|\-\fR? ?\fIpath\fR?
  Creates a slave interpreter identified by \fIpath\fR and a new command,
  called a \fIslave command\fR. The name of the slave command is the last
  component of \fIpath\fR. The new slave interpreter and the slave command
***************
*** 148,161 ****
  the slaves for its master;  an error occurs if a slave interpreter by the
  given name already exists in this master.
  .TP
! \fBinterp \fBdelete \fR?\fIpath ...?\fR
  Deletes zero or more interpreters given by the optional \fIpath\fR
  arguments, and for each interpreter, it also deletes its slaves. The
  command also deletes the slave command for each interpreter deleted.
  For each \fIpath\fR argument, if no interpreter by that name
  exists, the command raises an error.
  .TP
! \fBinterp \fBeval \fIpath arg \fR?\fIarg ...\fR?
  This command concatenates all of the \fIarg\fR arguments in the same
  fashion as the \fBconcat\fR command, then evaluates the resulting string as
  a Tcl script in the slave interpreter identified by \fIpath\fR. The result
--- 148,161 ----
  the slaves for its master;  an error occurs if a slave interpreter by the
  given name already exists in this master.
  .TP
! \fBinterp\fR \fBdelete \fR?\fIpath ...?\fR
  Deletes zero or more interpreters given by the optional \fIpath\fR
  arguments, and for each interpreter, it also deletes its slaves. The
  command also deletes the slave command for each interpreter deleted.
  For each \fIpath\fR argument, if no interpreter by that name
  exists, the command raises an error.
  .TP
! \fBinterp\fR \fBeval\fR \fIpath arg \fR?\fIarg ...\fR?
  This command concatenates all of the \fIarg\fR arguments in the same
  fashion as the \fBconcat\fR command, then evaluates the resulting string as
  a Tcl script in the slave interpreter identified by \fIpath\fR. The result
***************
*** 163,175 ****
  and \fBerrorCode\fR variables, if an error occurs) is returned to the
  invoking interpreter.
  .TP
! \fBinterp \fBexists \fIpath\fR
  Returns  \fB1\fR if a slave interpreter by the specified \fIpath\fR
  exists in this master, \fB0\fR otherwise. If \fIpath\fR is omitted, the
  invoking interpreter is used.
  .VS BR
  .TP
! \fBinterp \fBexpose \fIpath\fR \fIhiddenName\fR ?\fIexposedCmdName\fR?
  Makes the hidden command \fIhiddenName\fR exposed, eventually bringing
  it back under a new \fIexposedCmdName\fR name (this name is currently
  accepted only if it is a valid global name space name without any ::),
--- 163,175 ----
  and \fBerrorCode\fR variables, if an error occurs) is returned to the
  invoking interpreter.
  .TP
! \fBinterp\fR \fBexists\fR \fIpath\fR
  Returns  \fB1\fR if a slave interpreter by the specified \fIpath\fR
  exists in this master, \fB0\fR otherwise. If \fIpath\fR is omitted, the
  invoking interpreter is used.
  .VS BR
  .TP
! \fBinterp\fR \fBexpose\fR \fIpath\fR \fIhiddenName\fR ?\fIexposedCmdName\fR?
  Makes the hidden command \fIhiddenName\fR exposed, eventually bringing
  it back under a new \fIexposedCmdName\fR name (this name is currently
  accepted only if it is a valid global name space name without any ::),
***************
*** 179,185 ****
  fails.
  Hidden commands are explained in more detail in HIDDEN COMMANDS, below.
  .TP
! \fBinterp \fBhide \fIpath\fR \fIexposedCmdName\fR ?\fIhiddenCmdName\fR?
  Makes the exposed command \fIexposedCmdName\fR hidden, renaming
  it to the hidden command \fIhiddenCmdName\fR, or keeping the same name if
  \fIhiddenCmdName\fR is not given, in the interpreter denoted
--- 179,185 ----
  fails.
  Hidden commands are explained in more detail in HIDDEN COMMANDS, below.
  .TP
! \fBinterp\fR \fBhide\fR \fIpath\fR \fIexposedCmdName\fR ?\fIhiddenCmdName\fR?
  Makes the exposed command \fIexposedCmdName\fR hidden, renaming
  it to the hidden command \fIhiddenCmdName\fR, or keeping the same name if
  \fIhiddenCmdName\fR is not given, in the interpreter denoted
***************
*** 194,204 ****
  command, by making the current namespace be different from the global one.
  Hidden commands are explained in more detail in HIDDEN COMMANDS, below.
  .TP
! \fBinterp \fBhidden \fIpath\fR
  Returns a list of the names of all hidden commands in the interpreter
  identified by \fIpath\fR.
  .TP
! \fBinterp \fBinvokehidden\fR \fIpath\fR ?\fB-global\fR \fIhiddenCmdName\fR ?\fIarg ...\fR?
  Invokes the hidden command \fIhiddenCmdName\fR with the arguments supplied
  in the interpreter denoted by \fIpath\fR. No substitutions or evaluation
  are applied to the arguments.
--- 194,204 ----
  command, by making the current namespace be different from the global one.
  Hidden commands are explained in more detail in HIDDEN COMMANDS, below.
  .TP
! \fBinterp\fR \fBhidden\fR \fIpath\fR
  Returns a list of the names of all hidden commands in the interpreter
  identified by \fIpath\fR.
  .TP
! \fBinterp\fR \fBinvokehidden\fR \fIpath\fR ?\fB-global\fR \fIhiddenCmdName\fR ?\fIarg ...\fR?
  Invokes the hidden command \fIhiddenCmdName\fR with the arguments supplied
  in the interpreter denoted by \fIpath\fR. No substitutions or evaluation
  are applied to the arguments.
***************
*** 209,220 ****
  Hidden commands are explained in more detail in HIDDEN COMMANDS, below.
  .VE
  .TP
! \fBinterp \fBissafe\fR ?\fIpath\fR?
  Returns \fB1\fR if the interpreter identified by the specified \fIpath\fR
  is safe, \fB0\fR otherwise.
  .VS BR
  .TP
! \fBinterp \fBmarktrusted\fR \fIpath\fR
  Marks the interpreter identified by \fIpath\fR as trusted. Does
  not expose the hidden commands. This command can only be invoked from a
  trusted interpreter.
--- 209,220 ----
  Hidden commands are explained in more detail in HIDDEN COMMANDS, below.
  .VE
  .TP
! \fBinterp\fR \fBissafe\fR ?\fIpath\fR?
  Returns \fB1\fR if the interpreter identified by the specified \fIpath\fR
  is safe, \fB0\fR otherwise.
  .VS BR
  .TP
! \fBinterp\fR \fBmarktrusted\fR \fIpath\fR
  Marks the interpreter identified by \fIpath\fR as trusted. Does
  not expose the hidden commands. This command can only be invoked from a
  trusted interpreter.
***************
*** 222,228 ****
  already trusted.
  .VE
  .TP
! \fBinterp \fBshare\fR \fIsrcPath channelId destPath\fR
  Causes the IO channel identified by \fIchannelId\fR to become shared
  between the interpreter identified by \fIsrcPath\fR and the interpreter
  identified by \fIdestPath\fR. Both interpreters have the same permissions
--- 222,228 ----
  already trusted.
  .VE
  .TP
! \fBinterp\fR \fBshare\fR \fIsrcPath channelId destPath\fR
  Causes the IO channel identified by \fIchannelId\fR to become shared
  between the interpreter identified by \fIsrcPath\fR and the interpreter
  identified by \fIdestPath\fR. Both interpreters have the same permissions
***************
*** 231,242 ****
  channels accessible in an interpreter are automatically closed when an
  interpreter is destroyed.
  .TP
! \fBinterp \fBslaves\fR ?\fIpath\fR?
  Returns a Tcl list of the names of all the slave interpreters associated
  with the interpreter identified by \fIpath\fR. If \fIpath\fR is omitted,
  the invoking interpreter is used.
  .TP
! \fBinterp \fBtarget \fIpath alias\fR
  Returns a Tcl list describing the target interpreter for an alias. The
  alias is specified with an interpreter path and source command name, just
  as in \fBinterp alias\fR above. The name of the target interpreter is
--- 231,242 ----
  channels accessible in an interpreter are automatically closed when an
  interpreter is destroyed.
  .TP
! \fBinterp\fR \fBslaves\fR ?\fIpath\fR?
  Returns a Tcl list of the names of all the slave interpreters associated
  with the interpreter identified by \fIpath\fR. If \fIpath\fR is omitted,
  the invoking interpreter is used.
  .TP
! \fBinterp\fR \fBtarget\fR \fIpath alias\fR
  Returns a Tcl list describing the target interpreter for an alias. The
  alias is specified with an interpreter path and source command name, just
  as in \fBinterp alias\fR above. The name of the target interpreter is
***************
*** 246,252 ****
  invoking interpreter or one of its descendants then an error is generated.
  The target command does not have to be defined at the time of this invocation.
  .TP
! \fBinterp \fBtransfer\fR \fIsrcPath channelId destPath\fR
  Causes the IO channel identified by \fIchannelId\fR to become available in
  the interpreter identified by \fIdestPath\fR and unavailable in the
  interpreter identified by \fIsrcPath\fR.
--- 246,252 ----
  invoking interpreter or one of its descendants then an error is generated.
  The target command does not have to be defined at the time of this invocation.
  .TP
! \fBinterp\fR \fBtransfer\fR \fIsrcPath channelId destPath\fR
  Causes the IO channel identified by \fIchannelId\fR to become available in
  the interpreter identified by \fIdestPath\fR and unavailable in the
  interpreter identified by \fIsrcPath\fR.
diff -c -r tcl8.0/doc/pkgMkIndex.n tcl8.0a/doc/pkgMkIndex.n
*** tcl8.0/doc/pkgMkIndex.n     Wed Oct 23 10:02:45 1996
--- tcl8.0a/doc/pkgMkIndex.n    Fri Oct 24 10:57:14 1997
***************
*** 14,20 ****
  pkg_mkIndex \- Build an index for automatic loading of packages
  .SH SYNOPSIS
  .nf
! \fBpkg_mkIndex \fIdir \fIpattern \fR?\fIpattern pattern ...\fR?
  .fi
  .BE

--- 14,20 ----
  pkg_mkIndex \- Build an index for automatic loading of packages
  .SH SYNOPSIS
  .nf
! \fBpkg_mkIndex \fIdir\fR \fIpattern \fR?\fIpattern pattern ...\fR?
  .fi
  .BE

diff -c -r tcl8.0/doc/safe.n tcl8.0a/doc/safe.n
*** tcl8.0/doc/safe.n   Thu Aug 14 09:37:56 1997
--- tcl8.0a/doc/safe.n  Fri Oct 24 10:59:29 1997
***************
*** 104,110 ****
  .PP
  The following aliases are provided in a safe interpreter:
  .TP
! \fBsource\fB \fIfileName\fR
  The requested file, a Tcl source file, is sourced into the safe interpreter
  if it is found.
  The \fBsource\fR alias can only source files from directories in
--- 104,110 ----
  .PP
  The following aliases are provided in a safe interpreter:
  .TP
! \fBsource\fR \fIfileName\fR
  The requested file, a Tcl source file, is sourced into the safe interpreter
  if it is found.
  The \fBsource\fR alias can only source files from directories in
diff -c -r tcl8.0/doc/socket.n tcl8.0a/doc/socket.n
*** tcl8.0/doc/socket.n Wed Oct 23 10:02:43 1996
--- tcl8.0a/doc/socket.n        Fri Oct 24 11:00:28 1997
***************
*** 15,21 ****
  .sp
  \fBsocket \fR?\fIoptions\fR? \fIhost port\fR
  .sp
! \fBsocket \fB\-server \fIcommand\fR ?\fIoptions\fR? \fIport\fR
  .BE

  .SH DESCRIPTION
--- 15,21 ----
  .sp
  \fBsocket \fR?\fIoptions\fR? \fIhost port\fR
  .sp
! \fBsocket\fR \fB\-server \fIcommand\fR ?\fIoptions\fR? \fIport\fR
  .BE

  .SH DESCRIPTION
diff -c -r tcl8.0/doc/source.n tcl8.0a/doc/source.n
*** tcl8.0/doc/source.n Wed Oct 23 10:02:36 1996
--- tcl8.0a/doc/source.n        Fri Oct 24 11:00:57 1997
***************
*** 16,24 ****
  .SH SYNOPSIS
  \fBsource \fIfileName\fR
  .sp
! \fBsource \fB\-rsrc \fIresourceName \fR?\fIfileName\fR?
  .sp
! \fBsource \fB\-rsrcid \fIresourceId \fR?\fIfileName\fR?
  .BE

  .SH DESCRIPTION
--- 16,24 ----
  .SH SYNOPSIS
  \fBsource \fIfileName\fR
  .sp
! \fBsource\fR \fB\-rsrc \fIresourceName \fR?\fIfileName\fR?
  .sp
! \fBsource\fR \fB\-rsrcid \fIresourceId \fR?\fIfileName\fR?
  .BE

  .SH DESCRIPTION
diff -c -r tcl8.0/doc/switch.n tcl8.0a/doc/switch.n
*** tcl8.0/doc/switch.n Wed Oct 23 10:02:37 1996
--- tcl8.0a/doc/switch.n        Fri Oct 24 21:03:53 1997
***************
*** 14,22 ****
  .SH NAME
  switch \- Evaluate one of several scripts, depending on a given value
  .SH SYNOPSIS
! \fBswitch\fI \fR?\fIoptions\fR?\fI string \fIpattern body \fR?\fIpattern body \fR...?
  .sp
! \fBswitch\fI \fR?\fIoptions\fR?\fI string \fR{\fIpattern body \fR?\fIpattern body \fR...?}
  .BE

  .SH DESCRIPTION
--- 14,22 ----
  .SH NAME
  switch \- Evaluate one of several scripts, depending on a given value
  .SH SYNOPSIS
! \fBswitch \fR?\fIoptions\fR?\fI string pattern body \fR?\fIpattern body \fR...?
  .sp
! \fBswitch \fR?\fIoptions\fR?\fI string \fR{\fIpattern body \fR?\fIpattern body \fR...?}
  .BE

  .SH DESCRIPTION
diff -c -r tk8.0/doc/CrtPhImgFmt.3 tk8.0a/doc/CrtPhImgFmt.3
*** tk8.0/doc/CrtPhImgFmt.3     Fri Aug  8 16:25:17 1997
--- tk8.0a/doc/CrtPhImgFmt.3    Fri Oct 24 19:50:32 1997
***************
*** 132,140 ****
        char *\fIfileName\fR,
        char *\fIformatString\fR,
        PhotoHandle \fIimageHandle\fR,
!       int \fIdestX, int \fIdestY\fR,
!       int \fIwidth, int \fIheight\fR,
!       int \fIsrcX, int \fIsrcY\fR);
  .CE
  The \fIinterp\fR argument is the interpreter in which the command was
  invoked to read the image; it should be used for reporting errors.
--- 132,140 ----
        char *\fIfileName\fR,
        char *\fIformatString\fR,
        PhotoHandle \fIimageHandle\fR,
!       int \fIdestX\fR, int \fIdestY\fR,
!       int \fIwidth\fR, int \fIheight\fR,
!       int \fIsrcX\fR, int \fIsrcY\fR);
  .CE
  The \fIinterp\fR argument is the interpreter in which the command was
  invoked to read the image; it should be used for reporting errors.
***************
*** 160,168 ****
        char *\fIstring\fR,
        char *\fIformatString\fR,
        PhotoHandle \fIimageHandle\fR,
!       int \fIdestX, int \fIdestY\fR,
!       int \fIwidth, int \fIheight\fR,
!       int \fIsrcX, int \fIsrcY\fR);
  .CE
  The \fIinterp\fR argument is the interpreter in which the command was
  invoked to read the image; it should be used for reporting errors.
--- 160,168 ----
        char *\fIstring\fR,
        char *\fIformatString\fR,
        PhotoHandle \fIimageHandle\fR,
!       int \fIdestX\fR, int \fIdestY\fR,
!       int \fIwidth\fR, int \fIheight\fR,
!       int \fIsrcX\fR, int \fIsrcY\fR);
  .CE
  The \fIinterp\fR argument is the interpreter in which the command was
  invoked to read the image; it should be used for reporting errors.
diff -c -r tk8.0/doc/ParseArgv.3 tk8.0a/doc/ParseArgv.3
*** tk8.0/doc/ParseArgv.3       Fri Sep 20 18:02:43 1996
--- tk8.0a/doc/ParseArgv.3      Fri Oct 24 19:52:19 1997
***************
*** 207,213 ****
  .RS
  .CS
  int
! \fIfunc(dst, key, nextArg)
        char *\fIdst\fR;
        char *\fIkey\fR;
        char *\fInextArg\fR;
--- 207,213 ----
  .RS
  .CS
  int
! \fIfunc\fR(\fIdst\fR, \fIkey\fR, \fInextArg\fR)
        char *\fIdst\fR;
        char *\fIkey\fR;
        char *\fInextArg\fR;
diff -c -r tk8.0/doc/button.n tk8.0a/doc/button.n
*** tk8.0/doc/button.n  Tue Jun 10 18:27:29 1997
--- tk8.0a/doc/button.n Fri Oct 24 19:37:29 1997
***************
*** 14,20 ****
  .SH NAME
  button \- Create and manipulate button widgets
  .SH SYNOPSIS
! \fBbutton\fI \fIpathName \fR?\fIoptions\fR?
  .SO
  \-activebackground    \-cursor        \-highlightthickness    \-takefocus
  \-activeforeground    \-disabledforeground    \-image \-text
--- 14,20 ----
  .SH NAME
  button \- Create and manipulate button widgets
  .SH SYNOPSIS
! \fBbutton\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-activebackground    \-cursor        \-highlightthickness    \-takefocus
  \-activeforeground    \-disabledforeground    \-image \-text
diff -c -r tk8.0/doc/canvas.n tk8.0a/doc/canvas.n
*** tk8.0/doc/canvas.n  Fri Mar 21 09:46:06 1997
--- tk8.0a/doc/canvas.n Fri Oct 24 19:39:10 1997
***************
*** 14,20 ****
  .SH NAME
  canvas \- Create and manipulate canvas widgets
  .SH SYNOPSIS
! \fBcanvas\fI \fIpathName \fR?\fIoptions\fR?
  .SO
  \-background  \-highlightthickness    \-insertwidth   \-takefocus
  \-borderwidth \-insertbackground      \-relief        \-xscrollcommand
--- 14,20 ----
  .SH NAME
  canvas \- Create and manipulate canvas widgets
  .SH SYNOPSIS
! \fBcanvas\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-background  \-highlightthickness    \-insertwidth   \-takefocus
  \-borderwidth \-insertbackground      \-relief        \-xscrollcommand
***************
*** 256,262 ****
  \fItag\fR to the list of tags associated with the item if it
  isn't already present on that list.
  It is possible that no items will satisfy the constraints
! given by \fIsearchSpec and \fIarg\fRs, in which case the
  command has no effect.
  This command returns an empty string as result.
  \fISearchSpec\fR and \fIarg\fR's may take any of the following
--- 256,262 ----
  \fItag\fR to the list of tags associated with the item if it
  isn't already present on that list.
  It is possible that no items will satisfy the constraints
! given by \fIsearchSpec\fR and \fIarg\fRs, in which case the
  command has no effect.
  This command returns an empty string as result.
  \fISearchSpec\fR and \fIarg\fR's may take any of the following
diff -c -r tk8.0/doc/entry.n tk8.0a/doc/entry.n
*** tk8.0/doc/entry.n   Fri Feb 21 17:51:01 1997
--- tk8.0a/doc/entry.n  Fri Oct 24 19:39:35 1997
***************
*** 14,20 ****
  .SH NAME
  entry \- Create and manipulate entry widgets
  .SH SYNOPSIS
! \fBentry\fI \fIpathName \fR?\fIoptions\fR?
  .SO
  \-background  \-highlightbackground   \-insertontime  \-selectforeground
  \-borderwidth \-highlightcolor        \-insertwidth   \-takefocus
--- 14,20 ----
  .SH NAME
  entry \- Create and manipulate entry widgets
  .SH SYNOPSIS
! \fBentry\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-background  \-highlightbackground   \-insertontime  \-selectforeground
  \-borderwidth \-highlightcolor        \-insertwidth   \-takefocus
diff -c -r tk8.0/doc/event.n tk8.0a/doc/event.n
*** tk8.0/doc/event.n   Sun Nov  3 17:32:04 1996
--- tk8.0a/doc/event.n  Fri Oct 24 19:40:32 1997
***************
*** 34,40 ****
  If \fIvirtual\fR is already defined, the new physical event sequences
  add to the existing sequences for the event.
  .TP
! \fBevent delete <<\fIvirtual\fB>> \fR?\fIsequence \fIsequence ...\fR?
  Deletes each of the \fIsequence\fRs from those associated with
  the virtual event given by \fIvirtual\fR.
  \fIVirtual\fR may be any string value and \fIsequence\fR may have
--- 34,40 ----
  If \fIvirtual\fR is already defined, the new physical event sequences
  add to the existing sequences for the event.
  .TP
! \fBevent delete <<\fIvirtual\fB>> \fR?\fIsequence\fR \fIsequence ...\fR?
  Deletes each of the \fIsequence\fRs from those associated with
  the virtual event given by \fIvirtual\fR.
  \fIVirtual\fR may be any string value and \fIsequence\fR may have
diff -c -r tk8.0/doc/frame.n tk8.0a/doc/frame.n
*** tk8.0/doc/frame.n   Fri Oct 18 17:28:36 1996
--- tk8.0a/doc/frame.n  Fri Oct 24 19:41:53 1997
***************
*** 15,21 ****
  .SH NAME
  frame \- Create and manipulate frame widgets
  .SH SYNOPSIS
! \fBframe\fI \fIpathName ?\fIoptions\fR?
  .SO
  \-borderwidth \-highlightbackground   \-highlightthickness    \-takefocus
  \-cursor      \-highlightcolor        \-relief
--- 15,21 ----
  .SH NAME
  frame \- Create and manipulate frame widgets
  .SH SYNOPSIS
! \fBframe\fR \fIpathName\fR ?\fIoptions\fR?
  .SO
  \-borderwidth \-highlightbackground   \-highlightthickness    \-takefocus
  \-cursor      \-highlightcolor        \-relief
diff -c -r tk8.0/doc/label.n tk8.0a/doc/label.n
*** tk8.0/doc/label.n   Fri Sep 20 18:02:48 1996
--- tk8.0a/doc/label.n  Fri Oct 24 19:42:15 1997
***************
*** 14,20 ****
  .SH NAME
  label \- Create and manipulate label widgets
  .SH SYNOPSIS
! \fBlabel\fI \fIpathName \fR?\fIoptions\fR?
  .SO
  \-anchor      \-font  \-image \-takefocus
  \-background  \-foreground    \-justify       \-text
--- 14,20 ----
  .SH NAME
  label \- Create and manipulate label widgets
  .SH SYNOPSIS
! \fBlabel\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-anchor      \-font  \-image \-takefocus
  \-background  \-foreground    \-justify       \-text
diff -c -r tk8.0/doc/listbox.n tk8.0a/doc/listbox.n
*** tk8.0/doc/listbox.n Fri Sep 20 18:02:46 1996
--- tk8.0a/doc/listbox.n        Fri Oct 24 19:42:33 1997
***************
*** 14,20 ****
  .SH NAME
  listbox \- Create and manipulate listbox widgets
  .SH SYNOPSIS
! \fBlistbox\fI \fIpathName \fR?\fIoptions\fR?
  .SO
  \-background  \-foreground    \-relief        \-takefocus
  \-borderwidth \-height        \-selectbackground      \-width
--- 14,20 ----
  .SH NAME
  listbox \- Create and manipulate listbox widgets
  .SH SYNOPSIS
! \fBlistbox\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-background  \-foreground    \-relief        \-takefocus
  \-borderwidth \-height        \-selectbackground      \-width
diff -c -r tk8.0/doc/menu.n tk8.0a/doc/menu.n
*** tk8.0/doc/menu.n    Mon Aug  4 11:38:06 1997
--- tk8.0a/doc/menu.n   Fri Oct 24 19:43:16 1997
***************
*** 14,20 ****
  .SH NAME
  menu \- Create and manipulate menu widgets
  .SH SYNOPSIS
! \fBmenu\fI \fIpathName \fR?\fIoptions\fR?
  .SO
  \-activebackground    \-background    \-disabledforeground    \-relief
  \-activeborderwidth   \-borderwidth   \-font  \-takefocus
--- 14,20 ----
  .SH NAME
  menu \- Create and manipulate menu widgets
  .SH SYNOPSIS
! \fBmenu\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-activebackground    \-background    \-disabledforeground    \-relief
  \-activeborderwidth   \-borderwidth   \-font  \-takefocus
diff -c -r tk8.0/doc/menubutton.n tk8.0a/doc/menubutton.n
*** tk8.0/doc/menubutton.n      Fri May 23 09:55:33 1997
--- tk8.0a/doc/menubutton.n     Fri Oct 24 19:43:52 1997
***************
*** 14,20 ****
  .SH NAME
  menubutton \- Create and manipulate menubutton widgets
  .SH SYNOPSIS
! \fBmenubutton\fI \fIpathName \fR?\fIoptions\fR?
  .SO
  \-activebackground    \-cursor        \-highlightthickness    \-takefocus
  \-activeforeground    \-disabledforeground    \-image \-text
--- 14,20 ----
  .SH NAME
  menubutton \- Create and manipulate menubutton widgets
  .SH SYNOPSIS
! \fBmenubutton\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-activebackground    \-cursor        \-highlightthickness    \-takefocus
  \-activeforeground    \-disabledforeground    \-image \-text
diff -c -r tk8.0/doc/message.n tk8.0a/doc/message.n
*** tk8.0/doc/message.n Fri Sep 20 18:02:49 1996
--- tk8.0a/doc/message.n        Fri Oct 24 19:44:09 1997
***************
*** 14,20 ****
  .SH NAME
  message \- Create and manipulate message widgets
  .SH SYNOPSIS
! \fBmessage\fI \fIpathName \fR?\fIoptions\fR?
  .SO
  \-anchor      \-font  \-highlightthickness    \-takefocus
  \-background  \-foreground    \-padx  \-text
--- 14,20 ----
  .SH NAME
  message \- Create and manipulate message widgets
  .SH SYNOPSIS
! \fBmessage\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-anchor      \-font  \-highlightthickness    \-takefocus
  \-background  \-foreground    \-padx  \-text
diff -c -r tk8.0/doc/radiobutton.n tk8.0a/doc/radiobutton.n
*** tk8.0/doc/radiobutton.n     Mon Nov 25 09:42:39 1996
--- tk8.0a/doc/radiobutton.n    Fri Oct 24 19:44:43 1997
***************
*** 14,20 ****
  .SH NAME
  radiobutton \- Create and manipulate radiobutton widgets
  .SH SYNOPSIS
! \fBradiobutton\fI \fIpathName \fR?\fIoptions\fR?
  .SO
  \-activebackground    \-cursor        \-highlightthickness    \-takefocus
  \-activeforeground    \-disabledforeground    \-image \-text
--- 14,20 ----
  .SH NAME
  radiobutton \- Create and manipulate radiobutton widgets
  .SH SYNOPSIS
! \fBradiobutton\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-activebackground    \-cursor        \-highlightthickness    \-takefocus
  \-activeforeground    \-disabledforeground    \-image \-text
diff -c -r tk8.0/doc/scale.n tk8.0a/doc/scale.n
*** tk8.0/doc/scale.n   Fri Sep 20 18:02:50 1996
--- tk8.0a/doc/scale.n  Fri Oct 24 19:44:55 1997
***************
*** 14,20 ****
  .SH NAME
  scale \- Create and manipulate scale widgets
  .SH SYNOPSIS
! \fBscale\fI \fIpathName \fR?\fIoptions\fR?
  .SO
  \-activebackground    \-font  \-highlightthickness    \-repeatinterval
  \-background  \-foreground    \-orient        \-takefocus
--- 14,20 ----
  .SH NAME
  scale \- Create and manipulate scale widgets
  .SH SYNOPSIS
! \fBscale\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-activebackground    \-font  \-highlightthickness    \-repeatinterval
  \-background  \-foreground    \-orient        \-takefocus
diff -c -r tk8.0/doc/scrollbar.n tk8.0a/doc/scrollbar.n
*** tk8.0/doc/scrollbar.n       Fri Sep 20 18:02:51 1996
--- tk8.0a/doc/scrollbar.n      Fri Oct 24 21:08:10 1997
***************
*** 14,20 ****
  .SH NAME
  scrollbar \- Create and manipulate scrollbar widgets
  .SH SYNOPSIS
! \fBscrollbar\fI pathName \fR?\fIoptions\fR?
  .SO
  \-activebackground    \-highlightbackground   \-orient        \-takefocus
  \-background  \-highlightcolor        \-relief        \-troughcolor
--- 14,20 ----
  .SH NAME
  scrollbar \- Create and manipulate scrollbar widgets
  .SH SYNOPSIS
! \fBscrollbar\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-activebackground    \-highlightbackground   \-orient        \-takefocus
  \-background  \-highlightcolor        \-relief        \-troughcolor
***************
*** 256,262 ****
  The commands generated by scrollbars also have a different form
  when the old syntax is being used:
  .TP
! \fIprefix \fIunit\fR
  \fIUnit\fR is an integer that indicates what should appear at
  the top or left of the associated widget's window.
  It has the same meaning as the \fIfirstUnit\fR and \fIlastUnit\fR
--- 256,262 ----
  The commands generated by scrollbars also have a different form
  when the old syntax is being used:
  .TP
! \fIprefix\fR \fIunit\fR
  \fIUnit\fR is an integer that indicates what should appear at
  the top or left of the associated widget's window.
  It has the same meaning as the \fIfirstUnit\fR and \fIlastUnit\fR
diff -c -r tk8.0/doc/text.n tk8.0a/doc/text.n
*** tk8.0/doc/text.n    Tue Feb 18 17:39:50 1997
--- tk8.0a/doc/text.n   Fri Oct 24 19:46:33 1997
***************
*** 14,20 ****
  .SH NAME
  text \- Create and manipulate text widgets
  .SH SYNOPSIS
! \fBtext\fI \fIpathName \fR?\fIoptions\fR?
  .SO
  \-background  \-highlightbackground   \-insertontime  \-selectborderwidth
  \-borderwidth \-highlightcolor        \-insertwidth   \-selectforeground
--- 14,20 ----
  .SH NAME
  text \- Create and manipulate text widgets
  .SH SYNOPSIS
! \fBtext\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-background  \-highlightbackground   \-insertontime  \-selectborderwidth
  \-borderwidth \-highlightcolor        \-insertwidth   \-selectforeground
***************
*** 965,971 ****
  These semantics mean that the \fBmark next\fP operation can be used to
  step through all the marks in a text widget in the same order
  as the mark information returned by the \fBdump\fP operation.
! If a mark has been set to the special \fBend\fB index,
  then it appears to be \fIafter\fP \fBend\fP with respect to the \fBmark next\fP operation.
  An empty string is returned if there are no marks after \fIindex\fR.
  .TP
--- 965,971 ----
  These semantics mean that the \fBmark next\fP operation can be used to
  step through all the marks in a text widget in the same order
  as the mark information returned by the \fBdump\fP operation.
! If a mark has been set to the special \fBend\fP index,
  then it appears to be \fIafter\fP \fBend\fP with respect to the \fBmark next\fP operation.
  An empty string is returned if there are no marks after \fIindex\fR.
  .TP
diff -c -r tk8.0/doc/tkerror.n tk8.0a/doc/tkerror.n
*** tk8.0/doc/tkerror.n Tue Aug  5 09:46:29 1997
--- tk8.0a/doc/tkerror.n        Fri Oct 24 10:38:44 1997
***************
*** 27,33 ****
  so old script defining that error handler should still work, but you
  should anyhow modify your scripts to use \fBbgerror\fR instead
  of \fBtkerror\fR because that support for the old name might vanish
! in the near future. If that call fails, \fRbgerror\fR
  posts a dialog showing the error and offering to see the stack trace
  to the user. If you want your own error management you should
  directly override \fBbgerror\fR instead of \fBtkerror\fR.
--- 27,33 ----
  so old script defining that error handler should still work, but you
  should anyhow modify your scripts to use \fBbgerror\fR instead
  of \fBtkerror\fR because that support for the old name might vanish
! in the near future. If that call fails, \fBbgerror\fR
  posts a dialog showing the error and offering to see the stack trace
  to the user. If you want your own error management you should
  directly override \fBbgerror\fR instead of \fBtkerror\fR.
diff -c -r tk8.0/doc/toplevel.n tk8.0a/doc/toplevel.n
*** tk8.0/doc/toplevel.n        Fri Dec 13 17:32:04 1996
--- tk8.0a/doc/toplevel.n       Fri Oct 24 19:46:51 1997
***************
*** 14,20 ****
  .SH NAME
  toplevel \- Create and manipulate toplevel widgets
  .SH SYNOPSIS
! \fBtoplevel\fI \fIpathName \fR?\fIoptions\fR?
  .SO
  \-borderwidth \-highlightbackground   \-highlightthickness    \-takefocus
  \-cursor      \-highlightcolor        \-relief
--- 14,20 ----
  .SH NAME
  toplevel \- Create and manipulate toplevel widgets
  .SH SYNOPSIS
! \fBtoplevel\fR \fIpathName \fR?\fIoptions\fR?
  .SO
  \-borderwidth \-highlightbackground   \-highlightthickness    \-takefocus
  \-cursor      \-highlightcolor        \-relief
diff -c -r tk8.0/doc/wish.1 tk8.0a/doc/wish.1
*** tk8.0/doc/wish.1    Fri Oct 18 17:28:29 1996
--- tk8.0a/doc/wish.1   Fri Oct 24 10:51:56 1997
***************
*** 16,22 ****
  .SH SYNOPSIS
  \fBwish\fR ?\fIfileName arg arg ...\fR?
  .SH OPTIONS
! .IP "\fB\-colormap \fBnew\fR" 20
  Specifies that the window should have a new private colormap instead of
  using the default colormap for the screen.
  .IP "\fB\-display \fIdisplay\fR" 20
--- 16,22 ----
  .SH SYNOPSIS
  \fBwish\fR ?\fIfileName arg arg ...\fR?
  .SH OPTIONS
! .IP "\fB\-colormap \fInew\fR" 20
  Specifies that the window should have a new private colormap instead of
  using the default colormap for the screen.
  .IP "\fB\-display \fIdisplay\fR" 20



Fri, 14 Apr 2000 03:00:00 GMT  
 
 [ 1 post ] 

 Relevant Pages 

1. tcl8.0b1/doc and tk8.0b1/doc patches

2. Vds doc V5.3 ( To sell doc v5.3 )

3. Logo1.doc and Math1.doc in cyberspace

4. grafting DOM doc [as a fragment] into another DOM doc [node]

5. PROPOSAL: [].__doc__, "".__doc__, ...

6. doc string substition and overloading __doc__

7. [Doc-SIG] [development doc updates]

8. Tcl7.5/Tk4.1 doc patches

9. patch for makefile.vc on tcl8.0.4+ and tk8.0.4+

10. ANNOUNCE: plus- and dash-patches for Tcl8.0a2/Tk8.0a2 available

11. ANNOUNCE: plus-patches for Tcl8.0a1/Tk8.0a1 available

12. Tcl8.0p2, Tcl8.1a1: BUG+PATCH: lsort -dictionary compares signed chars

 

 
Powered by phpBB® Forum Software