GS 4.03 and 720x720 on Stylus Color 600 
Author Message
 GS 4.03 and 720x720 on Stylus Color 600

The command to get Ghostscript 4.03 to print on the Epson Stylus Color 600
in 720x720 resolution mode (at least, using Linux) is as follows:

  gs  -q -dSAFER -dNOPAUSE -sDEVICE=stcolor -r720x720 \
    -sDithering=fscmyk -dMicroweave -sOutputFile=- -

Note that this is in the form of a filter, so if you typed this stand-alone
(eg, not part of a filter process in your "lp" command, for instance
/var/spool/lpd/lp/filter) you'd need to redirect input and output, as in:

  gs -q -dSAFER -dNOPAUSE -sDEVICE=stcolor -r720x720 -sDithering=fscmyk \
    -dMicroweave -sOutputFile=- - < > escp2.dat

and then to print it manually on a printer, you'd do (as root):

  cat escp2.dat > /dev/lp1

Note that GS 4.03 does not come with a makefile set up to include "stcolor"
by default, you have to edit the makefile yourself to include it.  Note
also the "" is not the file you want to print, it's a parameter
file that needs to be in your GS resource directory, eg., on my machine
it's in the directory:


Good luck.

-john b.

Sun, 17 Oct 1999 03:00:00 GMT  
 [ 1 post ] 

 Relevant Pages 

1. GS 4.03 and Epson Stylus Color 600

2. EPSON Stylus Color 600 device driver for gs 5.03

3. Uniprint's problem for Epson stylus color I(720x720 dpi)

4. Printing with GSV2.7 to Epson Stylus Color 600

5. Epson Stylus Color 600, ghostscript, uniprint

6. How can I use an Epson Stylus 600 color with ghostview

7. Epson Color Stylus 600 with MkLinux

8. Epson Stylus Color 600 and Linux

9. Ghostscript and Epson Stylus Color 600 and 800

10. GS 4.03, X driver problem with only 255 color map entries

11. GS and Epson Stylus 600 - 600 dpi don't work?

12. gs 2.6.2 reads doc gs 4.03 does not


Powered by phpBB® Forum Software