contemporary acquisition of 2 analog signals with 2 different sampling frequency 
Author Message
 contemporary acquisition of 2 analog signals with 2 different sampling frequency

I have a daq card 6036 and a pci6014 and i would like to acquire the
same signal with 2 sampling frequency, showing the graphs overlapped
in a single wavechart. Is it possible using labview 6.11?


Sat, 20 Aug 2005 20:10:18 GMT  
 contemporary acquisition of 2 analog signals with 2 different sampling frequency
Yes. But due to the difference in sampling time you'll need to use an
XY plot rescale the xaxis of both signals to time. There was another
thread not more than 3 or 4 days ago in which this same topic came
up--check it out.

Mike...



Sun, 21 Aug 2005 13:57:52 GMT  
 contemporary acquisition of 2 analog signals with 2 different sampling frequency
Thankyou very much.
lorenzo


Sun, 21 Aug 2005 22:52:35 GMT  
 
 [ 3 post ] 

 Relevant Pages 

1. synchronizing analog data acquisition with analog waveform generation

2. How to display trigger line signal along with analog input signals

3. Simultaneous Analog Acquisitions

4. Analog voltage input to frequency

5. synchronizing digital output and analog data acquisition

6. Measuring frequency of a series of pulses from analog input

7. synchronisation between analog data-acquisition and counting increments

8. About PCI-6534 and analog acquisition

9. Measuring frequency from an analog input

10. synchronise digital and analog acquisition using PCI-6025E board

11. Voltage drift in an analog data acquisition

12. Sample frequency

 

 
Powered by phpBB® Forum Software