hp E3631A 
Author Message
 hp E3631A

If this is all in one VI, since your read and write are not connected,
you don't know which will happen first and will try to execute in
parallel. You should do the initialize first (once only), then the
setup, then the read, and lastly the close. Connect all of the VIs by
using the error cluster inputs and ouputs and the VISA reference. You
may have to put a small delay between the setup and read. Good luck.


Mon, 23 Aug 2004 23:03:44 GMT  
 
 [ 1 post ] 

 Relevant Pages 

1. Problems with the driver for the HP E3631A

2. HP 710 or HP 720 and DOS printing

3. HP Legal-Size HP codes

4. transform driver hp 4396A to hp 4195A

5. HP Server VS. HP 9000 Series

6. HP Deskjet / HP laserjet 5P

7. Using LabView 5.x with HP-IB Interface HP 82340

8. Oberon-System for HP-9000 (HP-UX 8.07)

9. Build problems on HP-UX with HP C compiler

10. Help with Elk on HP 425t running HP-UX 8.0

11. Chicken 0.990 on HP PA-RISC HP-UX 10.20

12. Converting Macros from HP-Cobol II under MPE/iX to MF Cobol under HP-UX 11i

 

 
Powered by phpBB® Forum Software