AI acquire waveform. maximum readable data 
Author Message
 AI acquire waveform. maximum readable data

Are you using a lowpass-filter for
The low frequency components could come
from alaising effects..
(see the NI DAQ tutorial)

Fri, 16 Jan 2004 23:11:45 GMT  
 AI acquire waveform. maximum readable data
To expand on the previos response, Nyquist Thereom tells us we need to
sample at least twice as fast as the signal's frequency to get an
accurate sampling and reduce aliasing effects. Aliasing can also be
due to noise sources in the environment so using a low-pass filter is
still a good idea. Here is a Knowledge Base on aliasing and low-pass

Fri, 16 Jan 2004 23:58:08 GMT  
 [ 2 post ] 

 Relevant Pages 

1. how to use AI acquire for continuous acquisition

2. AI Acquire Waveform confusion

3. Problem with AI acquire

4. Acquiring Waveforms continuously, but only keeping some of the data

5. Q: Acquiring data using two E series devices connected by RTSI and streaming data to disk

6. AL Acquire Waveform question

7. tds3034 scope: how to acquire waveform from channel 1 (average) and to trigger with channel 2

8. Problems using acquire waveform...

9. Using the NI tkds 30xx library, but there is a problem with acquiring waveforms

10. Version 6 Waveform versus Version 5 2D array in the AI READ vi

11. Readable mutually recursive data structures?

12. byte swapping to get data readable on a decstations


Powered by phpBB® Forum Software