Dell Computer Problem + DAQ1200 + RS232/4 
Author Message
 Dell Computer Problem + DAQ1200 + RS232/4

I try to install NI HW in my new Dell GX240 (1,76GHz P4, 256MB)
NI-PCI-1200 Slot4, PCI-Bus:2,device:10,function:0 IRQ:19, DMA0,1,2
NI-PCI-232/4 Slot3, PCI-Bus:2,device:9,function:0, IRQ:18
SW: labview 6.1  // Windoof 2000
Driver Version:
NI488 1.7
NI DAQ 6.9.2
NI IMAQ 2.5.2
NI Visa 2.6.0f7
NI Vis Server 1.0.0f4
NI Flex motion 5.1.5
NI Valuemotion 5.0.5
NI IVI Engine 1.83
Max 2.2.0

After first starting up ... driver install... etc... I can use MAX-Test
panel
to test the DAQ-1200 card... everything works... (also from Labview
itself...)
When I shutdown my computer and fire it up again, the MAX-Test panel
cannot
communicate with the DAQ card. Failure: on the spec. base address the
device does not answer... or so...

The interresting is, that if I change in Bios the IRQ - I can only
change 9,10,11 with this computer .. and fire the computer up again
the DAQ card works... till I shutdown again...

any hints are very welcome...

Best regards,
    Michael



Tue, 28 Sep 2004 20:29:54 GMT  
 Dell Computer Problem + DAQ1200 + RS232/4
"any hints .... welcome"

What OS?
Disable plug n play.
Disable/Enable "Scan for new devices" in MAX.
Try DAQ 1200 in different slots.

Ben



Thu, 30 Sep 2004 13:02:20 GMT  
 Dell Computer Problem + DAQ1200 + RS232/4
OS: I thought I wrote it : Windows 2000 SP2
T use different positions for the DAQ card is due to space available not
so easy, I need additional a 1409 framegrabber and a  GPIB card...
To disable scan for new devices, how can I add other NI hardware and
test?
Plug and pray was disabled...
It looks like, that NI is not Dell friendly or ...

Michael

Quote:

> "any hints .... welcome"

> What OS?
> Disable plug n play.
> Disable/Enable "Scan for new devices" in MAX.
> Try DAQ 1200 in different slots.

> Ben



Fri, 01 Oct 2004 18:54:21 GMT  
 
 [ 3 post ] 

 Relevant Pages 

1. DELL Computers Knowingly Installs Malfunctioning McAfee VirusScan Software

2. Dell Computer Needs x86 Programmers !

3. Dell 8100 problem with Clipper App

4. VXD: Virtual RS232 Port (Rs232 Filter) for Win9x

5. controlling DIO Ports with DAQ1200

6. Clipper 5.3 & Win98 - RS232 problem

7. reading problems with rs232

8. problems whith rs232 comunication

9. RS232 - problem

10. OS/2 WARP and DELL XPS P90 **** DON'T BUY DELL'S PC!!!

11. Dell Latitude D600 (or D500, D800) notebook?

12. Mesasge to RIEBENS (BEN DELL)

 

 
Powered by phpBB® Forum Software