CAN error out--OK(1073094667) and OK(1073094763) 
Author Message
 CAN error out--OK(1073094667) and OK(1073094763)

LabVIEW 6.0, NI_CAN 1.5, PCI CAN/2.

I use Intact.vi to communicate with my CAN device. The error out of
CAN read are OK(1073094667) or OK(1073094763).

Where is the problem?

Thanks,

Han



Tue, 09 Dec 2003 03:03:49 GMT  
 CAN error out--OK(1073094667) and OK(1073094763)
Make sure that your cabling is correct and the devices are connected
and operational.  Also, make sure that your board is powered
correctly.  Is your board set up for internal or exteral power?   If
it is set up for external power, then you must supply power to it.

Kim L
Applications Engineer
National Instruments



Fri, 12 Dec 2003 22:53:56 GMT  
 
 [ 2 post ] 

 Relevant Pages 

1. Buttons: Mac OK, Windows not OK

2. OK OK, one more plaything

3. TCP/IP error 503 in CW5=ok in CW5.5b the error

4. Error 48 - Is my log transaction coding ok?

5. OK - this is a new error....

6. I start to get error 37 when using COM1 from an executable which worked ok

7. LabVIEW 6.1 OK button error

8. OK button calls unwanted routine--No code in OK button embed points.

9. Why is '?' OK in a method name and not OK in a variable name ?

10. ok ok I know it's a beta, but...

11. Problem loading .so into wish/tixwish (tclsh is OK) Problem loading .so into wish/tixwish (tclsh is OK)

12. #viewModel ok to use?

 

 
Powered by phpBB® Forum Software