BLX 1313 in DOS Extended EXE 
Author Message
 BLX 1313 in DOS Extended EXE

I have a large application which I have been maintaining for 5 years. I use
Clipper 5.2e, Clipper Tools 3.0 and Blinker 3.1. Until last year I was
linking my application in Real Mode only. Then I switched to Dos Extended
version and installed it on user network. There were few initial glitches
but the after it sailed smoothly.

Most recently, another of my user upgraded to Windows NT workstation. This
user did not want the application on NT server but in stead on one
workstation only. I installed the application on NT server. When I execute
the application I run into two problems:

1. At startup it gives the message " Your application is attempting to
directly access the harddrive. The application may not function correctly."
There are two options 'Terminate' or 'Ignore'. I get by this by selecting
Ignore. I read in some article that Windows 95 and NT do not like certain
programs making direct calls to access the hard drive but the it is OK to
choose Ignore.

2. Secondly when the application has been running for a while and user has
switched several times between various applications running at the time,
and then user either tries to exit the application or shell to Dos, it ends
up in GPF error. It never happens while performing any of the functions of
the system. Only when you either exit the system or shell to DOS. I am
using Blinker function SWPRUNCMD("",0) to shell to DOS.

Screen dump from the GPF is reproduced below:

+---------------------------------------------------------------------------

---+
|||+------------------------------------------------------------------------

+|||
||||||+------------------------------------------------------------------+||

||||
|||||||||+------------------------------------------------------------+|||||

||||
||||||||||||+------------------------------------------------------+||||||||

||||
|||||||||||||||+------------------------------------------------+|||||||||||

||||
||||||||||||+-----------------------------------------------------+|||||||||

||||
|||||||||||||     |     |     |     |     |     |     |     |    
||||||||||||||
|||||||||||||  A  |  B  |  S  |  O  |  L  |  U  |  T  |  E  |    
||||||||||||||
|||||||||||||     |     |     |     |     |     |     |     |    
||||||||||||||
|||||||||||||-----+-----+-----+-----+-----+-----+-----+-----+-----||||||||||

||||
BLX286 : 1313 : exception error 0D : general protection fault, code =
FFFCh|||||
|||||||||||||  C  |  O  |  M  |  P  |  U  |  T  |  E  |  R  |    
||||||||||||||
Active host is DPMI (v3.10 iP5 15360 Kb)  |     |     |     |    
||||||||||||||
|||||||||||||-----+-----+-----+-----+-----+-----+-----+-----+-----||||||||||

||||
Reg  Value  Limit  Base       Flags  Segment  Module    File|    
||||||||||||||
CS   0277   50C3   024084A0   FB00     0C     MAINEXTD
C:\WINWIZ\MAINEXTD.EXE||
DS   00B7   FFFF   00005630   F300     ****     |     |     |    
||||||||||||||
ES   00B7   FFFF   00005630   F300    
****-----------------------+|||||||||||||
SS   00B7   FFFF   00005630   F300    
****---------------------+|||||||||||||||
||||||||||||+----------------------
2:05:58p-----------------------+||||||||||||
[Code byte CS] 5C 89 46 FC WINDOW WIZARD Version
3.0------------------+|||||||||
BLX286 : 1313 : exception error 0D : general protection fault, code =
FFFCh|||||
|||+------------------------Monday, November 17,
97-------------------------+|||
+----------------------------------Memory
=7512K-------------------------------+

Anyone's help will be greatly appreciated.

Thanks a lot in advance.

--
Subhash Chopra



Tue, 16 May 2000 03:00:00 GMT  
 
 [ 1 post ] 

 Relevant Pages 

1. BLX 1313 in Dos Extended EXE

2. Error BLX 1313 Exception Error in Clip 5.2e application

3. Error BLX 286 1313

4. GPF in Dos Extended EXE

5. Bx286 1313 :(

6. Blinker: 1313: exception error 0D

7. BLX286 1313-error under WIn2K clipper 5e2

8. Blinker 1313 error while reindexing.

9. BLX286 : 1313 : exception error 0D : general protection fault, code = 0000h

10. Clipper debugger BLX286 : 1313 error

11. Help! BLX286:1313 Error

12. Help! BLX286:1313 Error

 

 
Powered by phpBB® Forum Software